Thứ Bảy , Tháng Mười Hai 3 2022

Module input EL3356

Module input EL3356

Thông số kỹ thuật Beckhoff EL3356

đại lý EL3356 | nhà phân phối EL3356 | đại lý ES3356

Technical data EL3356 | ES3356
Number of inputs 2, for 1 resistor bridge in full bridge technology
Power supply via the E-bus
Technology resistor bridge, strain gauge
Distributed clocks
Measuring range UD max. -25…+25 mV rated voltage
Measuring range UREF max. -12…+12 V rated voltage
Internal resistance > 200 kΩ (UREF), > 1 MΩ (UD)
Input filter limit frequency 10 kHz low pass (-3 dB)
Conversion rate 100…4 samples/s (10…250 ms conversion time)
Power supply UV up to 12 V DC from power contacts, dependent on sensor
Resolution 16 bit, 32 bit presentation
Measuring error < ±0.01 % for the calculated load value in relation to the final load value with a 12 V feed and 24 mV bridge voltage (hence nominal strain gauge characteristic value of 2 mV/V), self-calibration active, 50 Hz filter active
Current consumption power contacts depends on strain gauge supply, min. 1 mA
Current consumption E-bus typ. 210 mA
Supported nominal sensitivity all, parameter resolution: 0.01 µV/V; recommended: 0.5…4 mV/V
Special features self-calibration, quadruple averager, dynamic filters
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex, IECEx
Related products
EL3356-0010 1-channel precise load cell analysis (resistor bridge), 24 bit
EL3356-0020 1-channel precise load cell analysis (resistor bridge), 24 bit, with calibration certificate
ELM3502-0000 2-channel measuring bridge analysis, full/half/quarter bridge, 24 bit, 20 ksps, push-in, service plug, 6-pin
ELM3504-0000 4-channel measuring bridge analysis, full/half/quarter bridge, 24 bit, 10 ksps, push-in, service plug, 6-pin

Trả lời

Email của bạn sẽ không được hiển thị công khai.