Thiết bị đầu cuối KL6904 | Bus Terminal, communication interface + 4-port digital output, 24 V DC, 0.5 A, TwinSAFE Logic
Thông số kỹ thuật thiết bị đầu cuối module Beckhoff KL6904 | Bus Terminal, communication interface + 4-port digital output, 24 V DC, 0.5 A, TwinSAFE Logic
| Thông số kỹ thuật | KL6904 |
|---|---|
| Connection technology | 2-wire |
| Thông số kỹ thuật | link unit between safe input and output signals |
| Số đầu ra | 4 |
| Max. output current | 0.5 A/20 mA min. (per channel) |
| Giao thức | TwinSAFE/Safety over EtherCAT |
| Cycle time | 4…100 ms |
| Fault response time | ≤ watchdog time (parameterizable) |
| Tiếp điểm nguồn tiêu thụ hiện tại | load-dependent |
| Current consumption K-bus | max. 250 mA |
| Installation position | horizontal |
| Safety standard | DIN EN ISO 13849-1:2008 (Cat. 4, PL e) and EN 61508:2010 (SIL 3) |
| Cân nặng | approx. 100 g |
| Protection rating | IP20 |
| Đánh dấu | ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
đại lý beckhoff | đại lý KL6904
nhà phân phối beckhoff | nhà phân phối KL6904
| Dữ liệu thân | KL-24-2x8pin |
|---|---|
| Kiểu thiết kế | compact terminal housing with signal LEDs |
| Vật liệu | polycarbonate |
| Kích thước (W x H x D) | 24 mm x 100 mm x 68 mm |
| Cài đặt | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Gắn cạnh nhau bằng phương tiện | double slot and key connection |
| Đánh dấu | labeling of the BZxxx series |
| Hệ thống dây điện | solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver |
| Mặt cắt kết nối | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Mặt cắt kết nối AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 |
| Chiều dài | 8…9 mm |
| Tiếp điểm nguồn tải hiện tại | Imax: 10 A |
Beckhoff việt nam, đại lý beckhoff, nhà phân phối beckhoff, module beckhoff, plc beckhoff đại lý beckhoff
