Mô đun EP8601-0022 | EtherCAT Box, 12-channel multi-interface, 8 x DI, 1 x CNT, 4 x DO, 2 x PWM, 1 x AI, 1 x AO, 1 x ENC AB
Thông số kỹ thuật module Beckhoff EP8601-0022 | EtherCAT Box, 12-channel multi-interface, 8 x DI, 1 x CNT, 4 x DO, 2 x PWM, 1 x AI, 1 x AO, 1 x ENC AB
To top
| Thông số kỹ thuật | EP8601-0022 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, shielded, screw type |
| Input filter | configurable (1 µs, 0.1 ms, 0.5 ms, 1 ms, 3 ms, 10 ms, 20 ms) |
| Signal connection | M12, screw type |
| Sensor supply | from control voltage US |
| Actuator supply | from the auxiliary voltage UP |
| Electrical isolation | 500 V |
| Khối lượng | approx. 250 g |
| Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Phê duyệt/đánh dấu | CE, UL |
| Thông số kỹ thuật | Multi-function | Counter |
|---|---|
| Connection technology | 1 x up/down counter |
| Specification | EN 61131-2, type 1, “0”: 11 V DC, typ. 3 mA |
| Number of counters | max. 1 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| “0” signal voltage | -3…+5 V (EN 61131-2, type 3) |
| “1” signal voltage | 11…30 V (EN 61131-2, type 3) |
| Input current | typ. 3 mA (EN 61131-2, type 1/3) |
| Counting frequency | max. 100 kHz |
| Counter depth | 32 bit |
| Special features | Set counter, lock, switch output |
| Thông số kỹ thuật | Multi-function | Encoder |
|---|---|
| Technology | incremental encoder interface HTL 24 V DC |
| Number of channels | 1 |
| Encoder connection | 1 x A, B: 24 V DC, single-ended connection, EN 61131-2, type 1, “0”: 11 V DC, typ. 3 mA |
| Additional inputs | latch/gate input, 24 V DC |
| Counter | 32 bit |
| Limit frequency | 400,000 increments/s (with 4-fold evaluation), corresponding to 100 kHz |
| Quadrature decoder | 4-fold evaluation |
| Special features | Set counter, lock, save, switch output |
| Thông số kỹ thuật | Multi-function | Digital output |
|---|---|
| Connection technology | 1-wire |
| Number of outputs | max. 4 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| Load type | ohmic, inductive, lamp load |
| Max. output current | 0.5 A (short-circuit proof) per channel |
| Short-circuit current | typ. |
| Reverse voltage protection | yes |
| Breaking energy |
| Thông số kỹ thuật | Multi-function | PWM |
|---|---|
| Connection technology | PWM output, push-pull outputs |
| Number of outputs | max. 2 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| Load type | ohmic, inductive, lamp load |
| Max. output current | 0.5 A (short-circuit proof) per channel |
| Short-circuit current | typ. |
| Base frequency | 20 Hz…25 kHz |
| Duty factor | 0…100 % (TON > 750 ns, TOFF > 500 ns) |
| Resolution | 16 bit |
| Thông số kỹ thuật | Multi-function | Analog input |
|---|---|
| Number of inputs | 1 |
| Signal type | single-ended |
| Internal resistance | voltage input: > 200 Ω current input: 33 Ω typ. |
| Measuring range, nominal | -10/0…+10 V | -20/0/+4…+20 mA |
| Measuring range, technical | -10.73…+10.73 V | -21.47…+21.47 mA |
| Resolution | 12 bit (16 bit presentation incl. sign) |
| Conversion time | ~ 1 ms |
| Input filter limit frequency | 1 kHz |
| Load | output: > 5 kΩ | |
| Dielectric strength | max. 30 V (voltage and current measurement) |
| Special features | U/I parameterizable, ExtendedRange, standard and compact process image, FIR/IIR filter activatable |
| Thông số kỹ thuật | Multi-function | Analog output |
|---|---|
| Number of outputs | 1 |
| Measuring range, nominal | -10/0…+10 V | 0/+4…+20 mA |
| Measuring range, technical | -10.73…+10.73 V | 0…+21.47 mA |
| Resolution | 12 bit (16 bit presentation incl. sign) |
| Conversion time | ~ 500 µs |
| Load | voltage output: > 5 kΩ (short-circuit-proof) current output: |
To top
| Housing data | 16 x M8, 8 x M12 |
|---|---|
| Kích thước (W x H x D) | 60 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3; 2 fixing holes 4.5 mm diameter for M4 |
| Thông số kỹ thuật | EP8601-0022 |
|---|---|
| Giao thức | EtherCAT |
| Giao diện | 2 x M8 socket, shielded, screw type |
| Input filter | configurable (1 µs, 0.1 ms, 0.5 ms, 1 ms, 3 ms, 10 ms, 20 ms) |
| Signal connection | M12, screw type |
| Sensor supply | from control voltage US |
| Actuator supply | from the auxiliary voltage UP |
| Cách ly điện | 500 V |
| Cân nặng | approx. 250 g |
| Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| Miễn nhiễm/phát xạ EMC | conforms to EN 61000-6-2/EN 61000-6-4 |
| Bảo vệ. vị trí đánh giá/cài đặt. | IP65/66/67 (conforms to EN 60529)/variable |
| Phê duyệt/đánh dấu | CE, UL |
nhà phân phối beckhoff | nhà phân phối EP8601-0022
đại lý beckhoff | đại lý EP8601-0022
nhà phân phối beckhoff | nhà phân phối Multi-function | Counter
đại lý beckhoff | đại lý Multi-function | Counter
| Thông số kỹ thuật | Multi-function Encoder |
|---|---|
| Technology | incremental encoder interface HTL 24 V DC |
| Number of channels | 1 |
| Encoder connection | 1 x A, B: 24 V DC, single-ended connection, EN 61131-2, type 1, “0”: 11 V DC, typ. 3 mA |
| Additional inputs | latch/gate input, 24 V DC |
| Counter | 32 bit |
| Limit frequency | 400,000 increments/s (with 4-fold evaluation), corresponding to 100 kHz |
| Quadrature decoder | 4-fold evaluation |
| Special features | Set counter, lock, save, switch output |
nhà phân phối beckhoff | nhà phân phối Multi-function | Encoder
đại lý beckhoff | đại lý Multi-function | Encoder
| Technical data | Multi-function | Digital output |
|---|---|
| Connection technology | 1-wire |
| Number of outputs | max. 4 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| Load type | ohmic, inductive, lamp load |
| Max. output current | 0.5 A (short-circuit proof) per channel |
| Short-circuit current | typ. |
| Reverse voltage protection | yes |
| Breaking energy |
đại lý beckhoff | đại lý Multi-function | Digital output
nhà phân phối beckhoff | nhà phân phối Multi-function | Digital output
| Technical data | Multi-function PWM |
|---|---|
| Connection technology | PWM output, push-pull outputs |
| Number of outputs | max. 2 |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| Load type | ohmic, inductive, lamp load |
| Max. output current | 0.5 A (short-circuit proof) per channel |
| Short-circuit current | typ. |
| Base frequency | 20 Hz…25 kHz |
| Duty factor | 0…100 % (TON > 750 ns, TOFF > 500 ns) |
| Resolution | 16 bit |
đại lý beckhoff | đại lý Multi-function | PWM
nhà phân phối beckhoff | nhà phân phối Multi-function | PWM
đại lý beckhoff | đại lý Multi-function | Analog input
nhà phân phối beckhoff | nhà phân phối Multi-function | Analog input
đại lý beckhoff | đại lý Multi-function | Analog output
nhà phân phối beckhoff | nhà phân phối Multi-function | Analog output
đại lý beckhoff | đại lý 16 x M8, 8 x M12
nhà phân phối beckhoff | nhà phân phối 16 x M8, 8 x M12
Beckhoff việt nam, đại lý beckhoff, nhà phân phối beckhoff, module beckhoff, plc beckhoff đại lý beckhoff
