Mô đun EP5151-0002

Mô đun EP5151-0002 | EtherCAT Box, 1-channel encoder interface, incremental, 24 V DC HTL, 1 MHz, M12

Thông số kỹ thuật module Beckhoff EP5151-0002 | EtherCAT Box, 1-channel encoder interface, incremental, 24 V DC HTL, 1 MHz, M12

To top

Thông số kỹ thuật	EP5151-0002
Protocol	EtherCAT
Bus interface	2 x M8 socket, shielded, screw type
Connection technology	M12, 8-pin
Encoder type	incremental encoder
Number of channels	1
Connection encoder/sensor	M12, screw type, 8-pin
Encoder connection	1 x A, B, C: 24 V DC, single-ended connection, EN 61131-2, type 1, “0”: 15 V DC, typ. 5 mA
Encoder operating voltage	24 V DC/0.5 A (generated from U_S)
Nominal voltage	24 V DC (-15 %/+20 %)
Encoder output current	0.5 A
Input signal	24 V DC, single-ended
Counter	1 x 16/32 bit switchable
Limit frequency	4 million increments/s (with 4-fold evaluation), corresponding to 1 MHz
Quadrature decoder	4-fold evaluation
Zero-pulse latch	1 x 16/32 bit switchable
Commands	read, set, enable
Distributed clocks	yes
Nguồn cấp connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Current consumption from US	typ. 130 mA + sensor supply
Electrical isolation	500 V
Nhiệt độ vận hành/bảo quản	0…+55 °C/-25…+85 °C
Chống rung/sốc	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Phê duyệt/đánh dấu	CE, UL
Protect. rating/installation pos.	IP65/66/67 (conforms to EN 60529)/variable

To top

Housing data	8 x M8, 4 x M12
Kích thước (W x H x D)	30 mm x 126 mm x 26.5 mm
Material	PA6 (polyamide)
Installation	2 fixing holes 3.5 mm diameter for M3

To top

Thông số kỹ thuật	EP5151-0002
Giao thức	EtherCAT
Giao diện	2 x M8 socket, shielded, screw type
Connection technology	M12, 8-pin
Encoder type	incremental encoder
Number of channels	1
Connection encoder/sensor	M12, screw type, 8-pin
Encoder connection	1 x A, B, C: 24 V DC, single-ended connection, EN 61131-2, type 1, “0”: 15 V DC, typ. 5 mA
Encoder operating voltage	24 V DC/0.5 A (generated from U_S)
Nominal voltage	24 V DC (-15 %/+20 %)
Encoder output current	0.5 A
Input signal	24 V DC, single-ended
Counter	1 x 16/32 bit switchable
Limit frequency	4 million increments/s (with 4-fold evaluation), corresponding to 1 MHz
Quadrature decoder	4-fold evaluation
Zero-pulse latch	1 x 16/32 bit switchable
Commands	read, set, enable
Đồng hồ phân phối	yes
Nguồn cấp connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Current consumption from US	typ. 130 mA + sensor supply
Cách ly điện	500 V
Nhiệt độ vận hành/bảo quản	0…+55 °C/-25…+85 °C
Chống rung/sốc	conforms to EN 60068-2-6/EN 60068-2-27
Miễn nhiễm/phát xạ EMC	conforms to EN 61000-6-2/EN 61000-6-4
Phê duyệt/đánh dấu	CE, UL
Bảo vệ. vị trí đánh giá/cài đặt.	IP65/66/67 (conforms to EN 60529)/variable

đại lý beckhoff | đại lý EP5151-0002

nhà phân phối beckhoff | nhà phân phối EP5151-0002

Dữ liệu thân	8 x M8, 4 x M12
Kích thước (W x H x D)	30 mm x 126 mm x 26.5 mm
Vật liệu	PA6 (polyamide)
Cài đặt	2 fixing holes 3.5 mm diameter for M3

đại lý beckhoff | đại lý 8 x M8, 4 x M12

nhà phân phối beckhoff | nhà phân phối 8 x M8, 4 x M12