Mô đun EP1258-0002 | EtherCAT Box, 8-channel digital input, 24 V DC, 1 µs, M12, timestamp
Thông số kỹ thuật module Beckhoff EP1258-0002 | EtherCAT Box, 8-channel digital input, 24 V DC, 1 µs, M12, timestamp
To top
| Thông số kỹ thuật | EP1258-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, shielded, screw type |
| Specification | EN 61131-2, type 1/3 |
| Number of inputs | 8, 2 with timestamp |
| Input connections | M12 x 1, 5-pin, a-coded |
| Nominal input voltage | 24 V DC (-15 %/+20 %) |
| Input filter | 10 µs |
| “0” signal voltage | -3…+5 V (similar to EN 61131-2, type 3) |
| “1” signal voltage | 11…30 V (similar to EN 61131-2, type 3) |
| Input current | typ. 3 mA (similar to EN 61131-2, type 3) |
| Distributed clocks | yes |
| Sensor supply | from control voltage, max. 0.5 A, short-circuit proof in total |
| Nguồn cấp connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
| Resolution timestamp | 1 ns (channel 0/1) |
| Precision of timestamp | 10 ns (+ input delay) (channel 0/1) |
| Distributed clock precision | |
| Current consumption from US | 120 mA |
| Electrical isolation | 500 V |
| Special features | timestamp, latch last edge |
| Khối lượng | approx. 165 g |
| Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Ex marking | II 3 G Ex nA IIC T4 Gc |
To top
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Kích thước (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
To top

| Thông số kỹ thuật | EP1258-0002 |
|---|---|
| Giao thức | EtherCAT |
| Giao diện | 2 x M8 socket, shielded, screw type |
| Thông số kỹ thuật | EN 61131-2, type 1/3 |
| Số đầu vào | 8, 2 with timestamp |
| Input connections | M12 x 1, 5-pin, a-coded |
| Nominal input voltage | 24 V DC (-15 %/+20 %) |
| Input filter | 10 µs |
| “0” signal voltage | -3…+5 V (similar to EN 61131-2, type 3) |
| “1” signal voltage | 11…30 V (similar to EN 61131-2, type 3) |
| Dòng điện đầu vào | typ. 3 mA (similar to EN 61131-2, type 3) |
| Đồng hồ phân phối | yes |
| Sensor supply | from control voltage, max. 0.5 A, short-circuit proof in total |
| Nguồn cấp connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
| Độ phân giải timestamp | 1 ns (channel 0/1) |
| Precision of timestamp | 10 ns (+ input delay) (channel 0/1) |
| Distributed clock precision | |
| Current consumption from US | 120 mA |
| Cách ly điện | 500 V |
| Tính năng đặc biệt | timestamp, latch last edge |
| Cân nặng | approx. 165 g |
| Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| Miễn nhiễm/phát xạ EMC | conforms to EN 61000-6-2/EN 61000-6-4 |
| Bảo vệ. vị trí đánh giá/cài đặt. | IP65/66/67 (conforms to EN 60529)/variable |
| Đánh dấu | II 3 G Ex nA IIC T4 Gc |
đại lý beckhoff | đại lý EP1258-0002
nhà phân phối beckhoff | nhà phân phối EP1258-0002
| Dữ liệu thân | 8 x M8, 4 x M12 |
|---|---|
| Kích thước (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Vật liệu | PA6 (polyamide) |
| Cài đặt | 2 fixing holes 3.5 mm diameter for M3 |
đại lý beckhoff | đại lý 8 x M8, 4 x M12
nhà phân phối beckhoff | nhà phân phối 8 x M8, 4 x M12
Beckhoff việt nam, đại lý beckhoff, nhà phân phối beckhoff, module beckhoff, plc beckhoff đại lý beckhoff
