Beckhoff việt nam, đại lý beckhoff, nhà phân phối beckhoff, module beckhoff, plc beckhoff đại lý beckhoff
Máy tính công nghiệp CX2033
Thông số kỹ thuật máy tính công nghiệp Beckhoff CX2033 | Basic CPU module
| Thông số kỹ thuật | CX2033 |
|---|---|
| Bộ vi xử lý | AMD Ryzen™ V1202B 2.3 GHz |
| Số lõi | 2 |
| Bộ nhớ flash | slot for CFast card |
| Bộ nhớ chính | 8 GB DDR4 RAM (expandable ex factory to 16 GB) |
| Persistent memory | 128 kB NOVRAM integrated |
| Giao diện | 2 x RJ45 10/100/1000 Mbit/s, 1 x DVI-D, 4 x USB 3.0, 1 x optional interface |
| Làm mát | passive cooling, optionally with active cooling ex factory |
| Diagnostics LED | 1 x power, 1 x TC status, 1 x flash access, 2 x bus status |
| Clock | internal battery-backed clock for time and date (battery exchangeable) |
| Hệ điều hành | Windows 10 IoT Enterprise 2019 LTSC, Windows 10 IoT Enterprise 2021 LTSC, TwinCAT/BSD |
| Phần mềm điều khiển | TwinCAT 2 runtime TwinCAT 3 runtime (XAR) |
| I/O connection | via power supply module (E-bus or K-bus, automatic recognition) |
| Nguồn cấp | 24 V DC (-15 %/+20 %) |
| Max. power consumption | 42 W |
| Kích thước (W x H x D) | 144 mm x 99 mm x 91 mm |
| Khối lượng | approx. 1165 g |
| Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
| Độ ẩm tương đối | 95 %, no condensation |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Cấp bảo vệ | IP20 |
| Phê duyệt/đánh dấu | CE, UL |
| TwinCAT 3 platform level | Performance Plus (50); please see here for an overview of all the TwinCAT 3 platform level |
đại lý beckhoff | đại lý CX2033
nhà phân phối beckhoff | nhà phân phối CX2033
| Ordering information | |
|---|---|
| CX2033-0100 | no operating system, no TwinCAT |
| CX2033-0160 | Windows 10 IoT Enterprise 2019 LTSC 32 bit, no TwinCAT |
| CX2033-0161 | Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 PLC runtime |
| CX2033-0162 | Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC PTP runtime |
| CX2033-0163 | Windows 10 IoT Enterprise 2019 LTSC 32 bit, TwinCAT 2 NC I runtime |
| CX2033-0170 | Windows 10 IoT Enterprise 2019 LTSC 64 bit, no TwinCAT |
| CX2033-0175 | Windows 10 IoT Enterprise 2019 LTSC 64 bit, TwinCAT 3 runtime (XAR) |
| CX2033-0185 | TwinCAT/BSD, TwinCAT 3 runtime (XAR) |
| CX2033-0190 | Windows 10 IoT Enterprise 2021 LTSC 64 bit, no TwinCAT |
| CX2033-0195 | Windows 10 IoT Enterprise 2021 LTSC 64 bit, TwinCAT 3 runtime (XAR) |
| Optional interfaces | |
|---|---|
| CX2033-N010 | DVI-D interface, additional DVI-D port for clone or extended display mode.
Is not supported by TwinCAT/BSD. |
| CX2033-N011 | DisplayPort interface, additional DisplayPort for clone or extended display mode.
Is not supported by TwinCAT/BSD. |
| CX2033-N030 | RS232 interface, D-sub plug, 9-pin |
| CX2033-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX2033-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX2033-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX2033-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX2033-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX2033-M112 | 2 x EtherCAT master interface |
| CX2033-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX2033-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX2033-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX2033-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX2033-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX2033-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45 switch) |
| CX2033-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
