Mô đun EL7201-9014
Thông số kỹ thuật module Beckhoff EL7201-9014 | EtherCAT Terminal, 1-channel motion interface, servomotor, 48 V DC, 2.8 A, OCT, suitable for STO applications
| Thông số kỹ thuật | EL7201-9014 |
|---|---|
| Giao thức | EtherCAT |
| Công nghệ | compact drive technology |
| Phương thức kết nối | direct motor connection with OCT |
| Số đầu vào | 2 x end position, 1 x feedback, 1 x STO |
| Load type | permanent magnet-excited three-phase synchronous motor |
| Number of channels | 1 |
| Số đầu ra | 1 x servomotor, 1 x motor brake |
| Supply voltage electronics | 24 V DC (via power contacts) |
| Supply voltage power | 8…48 V DC (external) |
| Output current (rms) | 2.8 A |
| Peak current (rms) | max. 5.7 A for 1 s |
| Performance increase | yes, through ZB8610 fan cartridge |
| Output current with ZB8610 (rms) | max. 4.5 A |
| Peak current with ZB8610 (rms) | max. 9.0 A for 1 s |
| Rotating field frequency | 0…599 Hz |
| PWM clock frequency | 16 kHz |
| Current controller frequency | 32 kHz |
| Rated speed controller frequency | 16 kHz |
| Output voltage motor brake | 24 V DC |
| Output current motor brake | max. 0.5 A |
| Tiếp điểm nguồn tiêu thụ hiện tại | typ. 100 mA + holding current motor brake |
| Tiêu thụ hiện tại E-bus | 120 mA |
| Đồng hồ phân phối | yes |
| Realization STO | hard-wired via safe output |
| Tính năng đặc biệt | compact (only 12 mm wide), absolute feedback, One Cable Công nghệ (OCT), integrated track control |
| Safe stop functions | Safe Torque Off (STO) |
| Cách ly điện | 500 V (E-bus/field potential) |
| Cân nặng | approx. 60 g |
| Nhiệt độ vận hành/bảo quản | 0…+55 °C/-25…+85 °C |
| Độ ẩm tương đối | 95 %, no condensation |
| Miễn nhiễm/phát xạ EMC | conforms to EN 61000-6-2/EN 61000-6-4 |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| Bảo vệ. vị trí đánh giá/cài đặt. | IP20/see documentation |
| Phê duyệt/đánh dấu | CE, UL |
đại lý beckhoff | đại lý EL7201-9014
nhà phân phối beckhoff | nhà phân phối EL7201-9014
| Dữ liệu thân | EL-12-16pin |
|---|---|
| Kiểu thiết kế | HD (High Density) housing with signal LEDs |
| Vật liệu | polycarbonate |
| Kích thước (W x H x D) | 12 mm x 100 mm x 68 mm |
| Cài đặt | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Gắn cạnh nhau bằng phương tiện | double slot and key connection |
| Đánh dấu | labeling of the BZxxx series |
| Hệ thống dây điện | solid conductors (e): direct plug-in technique; fine-stranded conductors (f) and ferrule (a): spring actuation by screwdriver |
| Mặt cắt kết nối | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Mặt cắt kết nối AWG | s*: AWG 28…16, st*: AWG 22…16, f*: AWG 26…19 |
| Chiều dài | 8…9 mm |
| Tiếp điểm nguồn tải hiện tại | Imax: 10 A |
Beckhoff việt nam, đại lý beckhoff, nhà phân phối beckhoff, module beckhoff, plc beckhoff đại lý beckhoff
