Mô đun EP5101-0011
Thông số kỹ thuật module Beckhoff EP5101-0011 | EtherCAT Box, 1-channel encoder interface, incremental, 5 V DC (DIFF RS422, TTL), 1 MHz, D-sub
Thông số kỹ thuật | EP5101-0011 |
---|---|
Protocol | EtherCAT |
Bus interface | 2 x M8 socket, shielded, screw type |
Connection technology | D-sub socket, 15-pin |
Encoder type | incremental, differential (RS422) |
Number of channels | 1 |
Connection encoder/sensor | D-sub socket, 15-pin |
Encoder connection | A, A (inv), B, B (inv), C,C (inv), differential inputs (RS422); status input 5 V DC; gate/latch input 24 V DC |
Encoder operating voltage | 5 V DC/150 mA (generated from US) |
Nominal voltage | 24 V DC (-15 %/+20 %) |
Input signal | difference signal (RS422), single-ended possible |
Counter | 1 x 16/32 bit switchable |
Limit frequency | 4 million increments/s (with 4-fold evaluation), corresponding to 1 MHz |
Quadrature decoder | 4-fold evaluation |
Zero-pulse latch | 1 x 16/32 bit switchable |
Commands | read, set, enable |
Distributed clocks | yes |
Nguồn cấp connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
Current consumption from US | typ. 130 mA + sensor supply |
Electrical isolation | 500 V |
Khối lượng | approx. 165 g |
Nhiệt độ vận hành/bảo quản | 0…+55 °C/-25…+85 °C |
Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Phê duyệt/đánh dấu | CE, UL |
Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
Housing data | 8 x M8, 4 x M12 |
---|---|
Kích thước (W x H x D) | 30 mm x 126 mm x 26.5 mm |
Material | PA6 (polyamide) |
Installation | 2 fixing holes 3.5 mm diameter for M3 |
Thông số kỹ thuật | EP5101-0011 |
---|---|
Giao thức | EtherCAT |
Giao diện | 2 x M8 socket, shielded, screw type |
Connection technology | D-sub socket, 15-pin |
Encoder type | incremental, differential (RS422) |
Number of channels | 1 |
Connection encoder/sensor | D-sub socket, 15-pin |
Encoder connection | A, A (inv), B, B (inv), C,C (inv), differential inputs (RS422); status input 5 V DC; gate/latch input 24 V DC |
Encoder operating voltage | 5 V DC/150 mA (generated from US) |
Nominal voltage | 24 V DC (-15 %/+20 %) |
Input signal | difference signal (RS422), single-ended possible |
Counter | 1 x 16/32 bit switchable |
Limit frequency | 4 million increments/s (with 4-fold evaluation), corresponding to 1 MHz |
Quadrature decoder | 4-fold evaluation |
Zero-pulse latch | 1 x 16/32 bit switchable |
Commands | read, set, enable |
Đồng hồ phân phối | yes |
Nguồn cấp connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
Current consumption from US | typ. 130 mA + sensor supply |
Cách ly điện | 500 V |
Cân nặng | approx. 165 g |
Nhiệt độ vận hành/bảo quản | 0…+55 °C/-25…+85 °C |
Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
Miễn nhiễm/phát xạ EMC | conforms to EN 61000-6-2/EN 61000-6-4 |
Phê duyệt/đánh dấu | CE, UL |
Bảo vệ. vị trí đánh giá/cài đặt. | IP65/66/67 (conforms to EN 60529)/variable |
đại lý beckhoff | đại lý EP5101-0011
nhà phân phối beckhoff | nhà phân phối EP5101-0011
Dữ liệu thân | 8 x M8, 4 x M12 |
---|---|
Kích thước (W x H x D) | 30 mm x 126 mm x 26.5 mm |
Vật liệu | PA6 (polyamide) |
Cài đặt | 2 fixing holes 3.5 mm diameter for M3 |