Mô đun EP4374-0002 | EtherCAT Box, 2-channel analog input + 2-channel analog output, multi-function, ±10 V, 0/4…20 mA, 16 bit, differential, M12
Thông số kỹ thuật module Beckhoff EP4374-0002 | EtherCAT Box, 2-channel analog input + 2-channel analog output, multi-function, ±10 V, 0/4…20 mA, 16 bit, differential, M12
To top
| Thông số kỹ thuật | EP4374-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, shielded, screw type |
| Number of outputs | 2 |
| Number of inputs | 2 |
| Input/output connections | M12 x 1, 5-pin, a-coded |
| Signal type | -10/0…+10 V | -20/0/4…+20 mA, parameterizable per channel |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| Load | output: > 5 kΩ | |
| Internal resistance | input: > 200 kΩ | typ. 85 Ω + diode voltage |
| Resolution | 16 bit |
| Conversion time | input: ~ 100 µs, output: ~ 40 µs |
| Measurement error/ uncertainty | input: |
| Actuator supply | from the auxiliary voltage UP |
| Nguồn cấp connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
| Electrical isolation | 500 V |
| Current consumption from US | 120 mA |
| Special features | combi module, current or voltage parameterizable per channel |
| Khối lượng | approx. 165 g |
| Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Phê duyệt/đánh dấu | CE, UL, ATEX |
| Ex marking | II 3 G Ex nA IIC T4 Gc |
To top
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Kích thước (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
To top

| Thông số kỹ thuật | EP4374-0002 |
|---|---|
| Giao thức | EtherCAT |
| Giao diện | 2 x M8 socket, shielded, screw type |
| Số đầu ra | 2 |
| Số đầu vào | 2 |
| Input/output connections | M12 x 1, 5-pin, a-coded |
| Loại tín hiệu | -10/0…+10 V -20/0/4…+20 mA, parameterizable per channel |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| Load | output: > 5 kΩ |
| Điện trở trong | input: > 200 kΩ typ. 85 Ω + diode voltage |
| Độ phân giải | 16 bit |
| Thời gian chuyển đổi | input: ~ 100 µs, output: ~ 40 µs |
| Lỗi đo lường / độ không đảm bảo | input: |
| Actuator supply | from the auxiliary voltage UP |
| Nguồn cấp connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin |
| Cách ly điện | 500 V |
| Current consumption from US | 120 mA |
| Tính năng đặc biệt | combi module, current or voltage parameterizable per channel |
| Cân nặng | approx. 165 g |
| Nhiệt độ vận hành/bảo quản | -25…+60 °C/-40…+85 °C |
| Chống rung/sốc | conforms to EN 60068-2-6/EN 60068-2-27 |
| Miễn nhiễm/phát xạ EMC | conforms to EN 61000-6-2/EN 61000-6-4 |
| Bảo vệ. vị trí đánh giá/cài đặt. | IP65/66/67 (conforms to EN 60529)/variable |
| Phê duyệt/đánh dấu | CE, UL, ATEX |
| Đánh dấu | II 3 G Ex nA IIC T4 Gc |
đại lý beckhoff | đại lý EP4374-0002
nhà phân phối beckhoff | nhà phân phối EP4374-0002
| Dữ liệu thân | 8 x M8, 4 x M12 |
|---|---|
| Kích thước (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Vật liệu | PA6 (polyamide) |
| Cài đặt | 2 fixing holes 3.5 mm diameter for M3 |
đại lý beckhoff | đại lý 8 x M8, 4 x M12
nhà phân phối beckhoff | nhà phân phối 8 x M8, 4 x M12
Beckhoff việt nam, đại lý beckhoff, nhà phân phối beckhoff, module beckhoff, plc beckhoff đại lý beckhoff
